that Kona Paddy Wagon winter bike

That PaddyWagon frame has built up into a really nice winter trainer.. I built it on Tuesday afternoon and took it for a quick 60km shakedown spin yesterday afternoon. It’s a nice ride.. not as sparkly as my DeSalvo but you wouldn’t expect that, but it does have that nice ride that is particular to more than half-decent steel frames, handles well and is stiff enough to go up hills quickly without feeling as if the frame is soaking up the power from my legs. Should keep me happy for a few winters, although I distinctly remember saying that about every one of at least the last 5 winter bikes I’ve built…

I stopped for the obligatory snap on the waterfront at Marazion.. St Michael’s Mount in the background

Most of the parts came out of my bits box with the exception of the headset (new), the mudguards/fenders (£20 from a mate), a deep drop front calliper (DiaCompe, fleabay) and a new chain. I use Miche 1/8″ track chains a lot, they’re good value – you can usually find them for around £7, they run quietly (unlike some 1/8″ chains) and last well enough to survive a solid winter of riding. The build is a somewhat eclectic mix, and quite classy for a winter machine.. Goldtec track hubs on Open Pro Rims, those Honjo fenders, a Thomson Elite seatpost, Deda Newton bars (on a no-name polished stem), Miche track chainset (172.5mm) and the San Marco Regal saddle that used to be on my Nomad.. the leather is totally worn out on it but that saddle and my butt have seen some pretty epic journeys together so I’ll keep using it ’till it dies completely. Gearing is pretty standard 48×18 that I’ve been running in the winter for years.. gives me a comfortable cruising speed range up of a relaxed 2okm/hr up to 40-41km/hr.. or 48-5okm/hr if I cane it but the cadence gets a bit high to sustain for more than a few minutes, and I  can get up everything that Cornwall has to offer by way of hills, including the stiff 22%+ grades around the Helford without particular difficulty.. well, no hernias anyway. Sorted.

initially I wasn’t sure about the hammered, polished look of the Honjos but given they were cheaper than a new set of SKS chromoplastics fitting them was a no brainer (fiddly job) but now they’re on I think they look ace.

I still maintain that compact frame styles look a bit silly but for the paltry sum it cost me I can live with it… and it is a nice colour..

About these ads

13 thoughts on “that Kona Paddy Wagon winter bike

  1. Hi Mike, nice job.
    i’m doing something similar with a condor steel frame, and was wondering if there are mudguard mounts on that frame, and if not, how did you fix the mudguards?

    • hey, it’s really hard to find steel fixed gear frames with mudguard mounts.. the Paddy Wagon is a rare thing in reespect of that in that it does have proper mounts both front and rear. There is no threaded boss on the chainstay bridge but I just used a zip-tie down there with a rubber ‘buffer’ (old inner tube rubber) between the guard and the bridge. The current 2012 frame has them also.
      In the past where a track frame hasn’t got bosses on the back I’ve just drilled and tapped the dropout for an M5 bolt. Forks are a bit more awkward, can’t drill those…!
      cheers!
      Mike

  2. Thanks for the reply. I was also wondering why a steel fork was a deal breaker for this build? i thought current wisdom was that steel frames ‘need’ a carbon fork to make them a bit better handling?

    • nah, steel forks are lovely, sure they’re heavier and not as stiff as a carbon fork but if the bike isn’t being raced that doesn’t matter and you do get a nice supple ride for less wedge. They also look better on a skinny tubed steel frame IMO, fat carbon forks with skinny pipes don’t look right to my eye…

      Alloy forks on the other hand.. don’t go there.

  3. One more thing (!) – as someone who’s currently also wrestling with winter bike decisions and questions, I’m somewhat bemused by the choice of steel to save your titanium fixed frame, which would be way more resistant to winter corrosion and grit, wouldn’t it? all you’d have to do is switch your fancy phil wheels and put the mudguards on it..
    I’m not trying to nit-pick your choice, I’m just trying to get to grips with the winter-bike concept as a whole and decide what’s right for me…

    • haha, good question and one I ponder occasionally myself.. bottom line is I’m a tart :-) Originally I did plan to use the DeSalvo for winer (I did for one season) hence the hidden fender eyes… but then I put all the nice parts on it… and also found that there are no good looking winter carbon forks around (IMO.. again..) so decided in the end that I enjoyed riding it as ‘nice bike’ too much to want to have it in winter mode, hence the separate winter hack.. which given I had most parts worked out as cheap as buying a second fork for the DeSalvo.. a winter one with mudguard eyes.. The steel Kona will corrode eventually but CroMo is surprisingly resistant to rust, as compared to say mild steel.. so it will last many years anyway provided one pays a little attention to washing salt off etc.. and given it was so cheap I’m happy with that. The very thin-walled steel frames, especially older ones made from 753, 653 etc will rust through quicker simply because the tube wall thickness is so small.. but a 4130 CroMo frame has relatively thick tube sidewalls (Reynolds 520 would be the same for example) so wll last…

      You could always go the cheap alloy frame + carbon fork route.. plenty of those around with mudguard eyes but really steel will last as well with a little care.

  4. Good answer, that all makes sense to me! i’ve been looking to pick up a cheap or cheap-ish Ti frame for winter as an alternative to summer carbon.

  5. Hey, great looking bike! Sorry to dig up an old thread, but i am considering a setup very much like this, and i have a concern: in the event of a rear flat, how much of a problem will the full metal fenders+rear facing drop outs be? I would guess that fully removing the fender to fix a flat is something you’d only do once, and simply unbolting the stays and bending the fender up is a no-go with metal fenders… What has your experience been?

    • hey, cheers for your message. re the fenders and a flat tyre.. it’s actually not been a problem at all, the bolt I’m using to secure the fender to the dropout uses the same size hex-key as my front axle, so a couple of turns of the bolt releases the stays and the wheels slides out with no drama at all.. with the honjo fenders I find it easier to get out than on my last winter bike that had sks fenders… the honjos only have a single stay each side and perhaps it’s that which makes it easy – there’s plenty of flexibility to allow the wheel to slide backwards and then simply drop out. No drama at all.
      cheers!
      Mike

  6. Hi there,

    I’m currently loving my 2012 Kona Paddy Wagon as a commuter bike and I’m thinking of getting some full fenders for it. I’m worried full fenders like the SKS chromoplastic won’t fit while running 28c continental gatorskins. Can you share any knowledge to alleviate this concern? What size are the tyres you’re running on this bike.

    Thanks

  7. 28mm tires with SKS Bluemels works fine, I have about 3 mm space left. But, for a real winter bike, I believe 28 mm tires is still a bit too slim.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s